We carry compatible replacement heating wires and sealing strips for your FoodSaver and Rival Seal-A-meal vacuum sealers. Rather than purchase a new FoodSaver, purchase replacement parts at a fraction of the price. A sealer (including the FoodSaver vacuum sealer) requires maintenance as part of the natural wear and tear cycle of the machine. If you are using your vacuum sealer often, most likely you will need to change the heating wire and sealing strip on a regular basis.
Sealing Strip - This is a PTFE adhesive that serves as a barrier between the heating element and body of the sealer. When the sealer's heating wire has burned through the sealing strip, the heating element will break which could also result in more damage to other sealer parts. We recommend changing the sealing strip whenever you see that the strip appears worn or discolored. The sealing strip we carry measures 14" x 1/2" (L x W) which is slightly wider than FoodSaver sealing strips, but will work on your FoodSaver sealers. We also carry lengths in 10 and 36 yards.
Heating Element / Wire - After heavy use of the vacuum sealer, it is natural for the heating element to break. The amount of seals per sealing wire is dependent on your timer setting, how often you use your vacuum sealer and how thick your vacuum bags are. When you replace the heating element, we usually recommend you replace the sealing strip as well. Different machines have different sizes of heating elements but we carry five stock elements.
Stock Element #1 (Model No. HE-14-FS-1) will work for the following FoodSaver models: Vac 350, 365, 375, 550, and 750.Our stock heating wire #1 measures: #1 - 15 3/4" (Outside of Eyelet to Outside of Eyelet), #2 - 15 1/2" (Back of Eyelet Hole to Back of Eyelet Hole) and #3 - 2mm (Width of Element).
Stock Element #2 (Model No. HE-14-FS-2) will work for the following models: FoodSaver V2040, V2060, Rival Seal-a-Meal VS110, VS220 and VS230. Our in stock heating wire #2 measures: #1 - 13 1/2" (Outside of Eyelet to Outside of Eyelet), #2 - 13 3/8" (Back of Eyelet Hole to Back of Eyelet Hole) and #3 - 2mm (Width of Element).
Stock Element #3 (Model No. HE-14-FS-3) will work for the following models: FoodSaver V825, V835 and V845. Our in stock heating wire #3 measures: #1 - 14 1/2" (Outside of Eyelet to Outside of Eyelet), #2 - 14 1/4" (Back of Eyelet Hole to Back of Eyelet Hole) and #3 - 2mm (Width of Element).
Stock Element #4 (Model No. HE-14-FS-4) will work for the following models: FoodSaver Professional, GameSaver Turbo. Our in stock heating wire #4 measures: #1 - 15" (Outside of Eyelet to End) - ONLY ONE EYELET HOLE FOR THIS ELEMENT and #3 - 2mm (Width of Element). If the element is too long, you may cut to your dimensions as there is only one eyelet for this element.
Stock Element Custom (Model No. HE-14-CUSTOM) is available if your measurements do not fit the above. Please provide us with your element measurements using our Element Measurement Guide and we can try and make a custom element for you. Please include Measurement #1, #2, and #3 for your order. Note: Custom elements are NON-REFUNDABLE.
If you do not find what you are looking for, please contact us and we will gladly be of assistance.
Please visit our sister website for FoodSaver compatible bags and rolls.